equipment, or specified to be furnished as part of the contract; and a list
of additional items recommended by the manufacturer to ensure efficient
operation for a period of 120 days.
PART 2
PRODUCTS
2.1
GENERAL EQUIPMENT REQUIREMENTS
2.1.1
Standard Products
Materials and equipment shall be the standard products of a manufacturer
regularly engaged in the manufacture of such products and shall essentially
duplicate items that have been in satisfactory use for at least 2 years
prior to bid opening. Equipment shall be supported by a service
organization that is, in the opinion of the Contracting Officer, reasonably
convenient to the site.
2.1.2
Nameplates
Each major item of equipment shall have the manufacturer's name, address,
type or style, model or serial number, and catalog number on a plate
secured to the item of equipment.
2.1.3
Verification of Dimensions
The Contractor shall become thoroughly familiar with all details of the
work, verify all dimensions in the field, and shall advise the Contracting
Officer of any discrepancy before performing any work.
2.1.4
Identical Items
Items of the same classification shall be identical, including equipment,
assemblies, parts, and components.
2.1.5
Equipment Guards [and Access]
Belts, pulleys, chains, gears, couplings, projecting set-screws, keys, and
other rotating parts so located that any person may come in close proximity
shall be fully enclosed or guarded. High-temperature equipment and piping
so located as to endanger personnel or where it creates a potential fire
hazard shall be properly guarded or covered with insulation of a type
specified. [Catwalk, ladder, and guard rails shall be provided where shown
and shall be in accordance with Section 05055A METALWORK FABRICATION,
MACHINE WORK, MISCELLANEOUS PROVISIONS.]
2.1.6
Special Tools
One set of special tools, calibration devices, and instruments required for
operation, calibration, and maintenance of the equipment shall be provided.
2.2
PIPING SYSTEM
Piping system shall be complete with pipe, pipe fittings, valves,
strainers, expansion loops, hangers, inserts, supports, anchors, guides,
sleeves, and accessories. System materials shall conform to the following:
2.2.1
Copper Tubing
ASTM B 88M ASTM B 88, Type K where buried, Type L otherwise.
Collector
SECTION 13600A
Page 10