required drawings and information called out by this
guide specification to appear on the drawings.
**************************************************************************
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
ANSI Z21.22
(1999; A 2001) Relief Valves for Hot Water
Supply Systems
AMERICAN SOCIETY OF HEATING, REFRIGERATING AND AIR-CONDITIONING
ENGINEERS (ASHRAE)
ASHRAE 93
(2003) Methods of Testing to Determine the
Thermal Performance of Solar Collectors
AMERICAN WATER WORKS ASSOCIATION(AWWA)
AWWA C606
(2004) Grooved and Shouldered Joints
AMERICAN WELDING SOCIETY (AWS)
AWS B2.1
(2000) Welding Procedure and Performance
Qualification
AWS D1.2
(2003) Structural Welding Code - Aluminum
ASME INTERNATIONAL (ASME)
ASME B1.20.1
(1983; R 2001) Pipe Threads, General
Purpose, Inch
ASME B16.15
(1985; R 2004) Cast Bronze Threaded
Fittings Classes 125 and 250
ASME B16.18
(2002) Cast Copper Alloy Solder Joint
Pressure Fittings
ASME B16.22
(2002) Wrought Copper and Copper Alloy
Solder Joint Pressure Fittings
ASME B16.24
(2002) Cast Copper Alloy Pipe Flanges and
Flanged Fittings: Classes 150, 300, 400,
600, 900, 1500, and 2500
SECTION 13600A
Page 5
Previous Page
