designation identifies the office that will review the submittal for the
Government.] The following shall be submitted in accordance with Section
01330 SUBMITTAL PROCEDURES:
SD-02 Shop Drawings
Solar Energy System
As-Built Drawings
Drawings containing a system schematic; a collector layout and
roof plan noting reverse-return piping for the collector array; a
system elevation; an equipment room layout; a schedule of
operation and installation instructions; and a schedule of design
information including collector height and width, recommended flow
rate and pressure drop at that flow rate, and number of collectors
to be grouped per bank. Drawings shall also contain complete
wiring and schematic diagrams and any other details required to
demonstrate that the system has been coordinated and will properly
function as a unit. Drawings shall show proposed layout and
anchorage of equipment and appurtenances, and equipment
relationship to other parts of the work, including clearances for
maintenance and operation. As-built drawings, as specified.
SD-03 Product Data
Spare Parts
A complete list of equipment and materials, as specified.
Solar Energy System
Manufacturer's descriptive and technical literature; performance
chart and curves; catalog cuts; and installation instructions.
Proposed diagrams, instructions, and other sheets, prior to
posting. A copy of the posted instructions proposed to be used,
including a system schematic, wiring and control diagrams, and a
complete layout of the entire system. The instructions shall also
include, in typed form, condensed operating instructions
explaining preventive maintenance procedures, methods of checking
the system for normal safe operation and procedures for safely
starting and stopping the system, methods of balancing and testing
flow in the system, and methods of testing for control failure and
proper system operation.
Welder Qualifications
Prior to welding operations, [_____] copies of qualified
procedures and lists of names and identification symbols of
qualified welders and welding operators.
SD-06 Test Reports
Inspection and Testing
An independent testing agency's certified reports of inspections
and laboratory tests, including analysis, position of
flow-balancing equipment, and interpretation of test results.
Each report shall be properly identified. Test methods used and
compliance with recognized test standards shall be described.
SECTION 13600A
Page 8
Previous Page
