195 should be consulted for applicable cathodic
protection requirements for specific applications.
**************************************************************************
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
ASTM INTERNATIONAL (ASTM)
ASTM B 418
(2001) Cast and Wrought Galvanic Zinc
Anodes
ASTM B 843
(1993; R 2003) Magnesium Alloy Anodes for
Cathodic Protection
ASTM D 1248
(2004) Polyethylene Plastics Extrusion
Materials for Wire and Cable
NACE INTERNATIONAL (NACE)
NACE RP0169
(2002) Control of External Corrosion on
Underground or Submerged Metallic Piping
Systems
NACE RP0177
(2000) Mitigation of Alternating Current
and Lightning Effects on Metallic
Structures and Corrosion Control Systems
NACE RP0188
(1999) Discontinuity (Holiday) Testing of
New Protective Coatings on Conductive
Substrates
NACE RP0190
(1995) External Protective Coatings for
Joints, Fittings, and Valves on Metallic
Underground or Submerged Pipelines and
Piping Systems
NACE RP0193
(2001) External Cathodic Protection of
On-Grade Carbon Steel Storage Tank Bottoms
NACE RP0285
(2002) Corrosion Control of Underground
Storage Tank Systems by Cathodic Protection
NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION (NEMA)
NEMA TC 2
(2003) Electrical Polyvinyl Chloride (PVC)
Tubing and Conduit
SECTION 13110A
Page 5
Previous Page
