paragraph since a limited number of manufacturers
offer a fabric flipper door. If fabric flipper
doors are not desired for maintenance reasons, the
fabric option may be eliminated since a metal
flipper door is readily available.
**************************************************************************
Shelves and dividers and top dust cover shall have a factory baked enamel
finish. Shelf supporting end panels shall have either a factory baked
enamel or laminate finish. Shelf bottom shall match end panel color.
Metal doors shall have an exterior finish of factory baked enamel or a
factory installed fabric covering and an interior finish of factory baked
enamel. Metal drawers shall have a factory baked enamel finish. Fabric
content of flipper doors shall be [_____]. [[Flipper doors] [and lateral
files] shall have a wood veneer surface.]
2.6
ACCESSORIES
2.6.1
Coat Storage
One [panel] [spine wall] mounted coat hook per workstation occupant shall
be provided at each workstation.
2.6.2
Keyboard Tray
**************************************************************************
NOTE: Delete reference to wrist supports if not
required.
**************************************************************************
Work surfaces shall be capable of accepting [an articulating keyboard] [a
keyboard shelf] on workstations as shown on the drawings. The keyboard
tray shall have the capability to be fully recessed under the work surface
and extend to give the user full access to the keyboard. Side travel
rotation shall be a 180-degree swing. The keyboard tray shall have tilting
capability and shall contain a wrist support. It should also include a
mouse pad at the same level as the keyboard, and accommodate either right
or left-handed users.
2.6.3
Computer Turntables
Turntables shall be provided on workstations as shown on the drawings.
Turntables shall contain a stop mechanism to prevent tangled cords.
2.6.4
Tackboards
Fabric shall be factory installed and fabric content of tackboards shall be
[_____]. Location and size shall be as shown on the drawings.
2.6.5
Erasable Marker Boards
Marker boards shall have a white writing surface which can be easily
written on and erased and shall be unaffected by common marker board
cleaning/conditioning agents and shall contain a storage tray. Size and
location shall be as shown on the drawings.
2.6.6
Paper Management Unit
Paper management units shall be provided as indicated on the drawings.
SECTION 12705
Page 18
Previous Page
