floor loading models.
**************************************************************************
Material handling equipment for sterilizers are scheduled with the
individual units. Accessories shall conform to the following:
2.12.1
Instrument Trays
Each instrument tray shall be made of welded nickel-copper-alloy, or Type
304 stainless steel.
2.12.2
Bottom Shelf
Each bottom shelf where scheduled shall be of nickel-copper-alloy, or Type
304 stainless steel. Supports shall conform to the same material
requirements as the shelf.
2.12.3
Shelves
Where scheduled, shelves and related supports shall be nickel-copper-alloy,
or Type 304 stainless steel.
2.12.4
Loading-Car and Carriage
Loading-car and carriage shall accommodate the transferring and loading of
goods in sterilizers and aerators. Loading-cars and carriages as scheduled
for each unit shall be furnished. Loading-car shall be welded
nickel-copper-alloy or Type 304 stainless steel with two or more adjustable
shelves. Wheels shall be stainless steel or brass. Carriage shall be
welded tubular steel with chip-resistant finish. Loading-car tracks shall
be height adjustable to align with tracks in processing chamber.
2.12.5
Loading Cart
Loading cart shall accommodate the transferring and loading of goods in
floor loading style sterilizers and aerators. Cart shall be polished
stainless steel tubular stock with each corner upright fitted with a rubber
bumper. Shelves shall be Type 304 stainless steel. Cart and shelves shall
be welded. A fixed bottom shelf and two shelves height-adjustable to at
least five positions shall be provided. Shelf mounts shall be noise
suppressing. Cart shall be mounted on two fixed and two swivel casters
fitted with nonmarking treads and suitable for repeated exposure to steam
at 135 degrees C 275 degrees F without flat spotting or other deterioration.
2.12.6
Automatic Materials Handling Accessories
[Washer-Sterilizer] [Washer-Decontaminator]: Metal parts shall be
nickel-copper-alloy or Type 304 stainless steel. In addition to 6 general
purpose racks per unit, each unit shall be provided with the necessary
racks, trays, inserts and load covers to suitably hold the following
quantity of items for processing.
a.
Bedpans, 6 each.
b.
Basins, wash, nominally 350 mm 14 inch diameter, 16 each.
c.
Basins, 175 mm 7 inch diameter, 10 each.
d.
Flasks, 2000 mL., 24 each.
SECTION 11710
Page 22
Previous Page
