**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
ANSI B16.18
(1984; R 1994) Cast Copper Alloy Solder
Joint Pressure Fittings
AMERICAN SOCIETY OF HEATING, REFRIGERATING AND AIR-CONDITIONING
ENGINEERS (ASHRAE)
ASHRAE 15
(2001; Errata 2002) Safety Standard for
Refrigeration Systems
AMERICAN SOCIETY OF SANITARY ENGINEERING (ASSE)
ASSE 1001
(2002) Atmospheric Type Vacuum Breakers
ASSE 1009
(1990) Commercial Food Waste Grinder Units
AMERICAN WELDING SOCIETY (AWS)
AWS A5.8
(1992) Filler Metals for Brazing and Braze
Welding
ASME INTERNATIONAL (ASME)
ASME A112.19.3M
(2001) Stainless Steel Fixtures (Designed
for Residential Use)
ASME B16.15
(1985; R 2004) Cast Bronze Threaded
Fittings Classes 125 and 250
ASME B16.22
(2002) Wrought Copper and Copper Alloy
Solder Joint Pressure Fittings
ASME B16.26
(1988) Cast Copper Alloy Fittings for
Flared Copper Tubes
ASTM INTERNATIONAL (ASTM)
ASTM A 123/A 123M
(2002) Zinc (Hot-Dip Galvanized) Coatings
on Iron and Steel Products
ASTM A 167
(2004) Stainless and Heat-Resisting
Chromium-Nickel Steel Plate, Sheet, and
Strip
ASTM A 270
(1998; R 2003) Seamless and Welded
Austenitic Stainless Steel Sanitary Tubing
ASTM A 276
(2004) Stainless Steel Bars and Shapes
ASTM A 36/A 36M
(2004) Carbon Structural Steel
ASTM A 653/A 653M
(2004a) Steel Sheet, Zinc-Coated
SECTION 11400N
Page 7
Previous Page
