Off-Gas Constituent
Influent
Effluent
Destruction
Estimate
Requirement
Requirement
------------------------------------------------------------------------
Monoxide
Average
[_____]
NA
NA
(ppmv)
Minimum
[_____]
NA
[98] [_____]%
Maximum
[_____]
[_____]
NA
NOX (ppmv)
Average
[_____]
NA
NA
Minimum
[_____]
NA
[_____]
Total Sulfur,
Maximum
[_____]
NA
NA
as SO2
Average
[_____]
NA
NA
(ppmv)
Minimum
[_____]
NA
NA
Sulfur,
Maximum
[_____]
[_____]
NA
SOX (ppmv)
Average
[_____]
NA
NA
Minimum
[_____]
NA
[_____]
Total Chlorine,
Maximum
[_____]
[_____]
NA
as HCl
Average
[_____]
NA
NA
(ppmv)
Minimum
[_____]
NA
[_____]
HCl (ppmv)
Maximum
[_____]
[_____]
NA
Average
[_____]
NA
NA
Minimum
[_____]
NA
[_____]
Water Vapor
Maximum
100%
NA
NA
(% saturation)
Average
[_____]
NA
NA
Minimum
[_____]
NA
NA
Particulates
Maximum
[_____]
[_____]
NA
(mg/m3 Average
[_____]
NA
NA
gr/dscf)Minimum
[_____]
NA
[_____]
Opacity (%)
Maximum
[_____]
[_____]
NA
Average
[_____]
NA
NA
Minimum
[_____]
NA
NA
Oxygen (%)
Maximum
[_____]
NA
NA
Average
[_____]
NA
NA
Minimum
[_____]
[_____]
NA
* Destruction percentage will be determined as follows:
100% x ((Influent mass - Effluent mass)/(Influent mass)).
** Dry basis, as hexane at 3% oxygen.
1.5
QUALIFICATIONS
1.5.1
Contractor
Contractor shall have had a minimum of [2] [3] [5] [_____] years of
experience in the construction of industrial air pollution control systems,
sanitary wastewater sludge digestion gas systems, landfill off-gas or vapor
extraction off-gas handling systems.
SECTION 11378
Page 14
Previous Page
