mounting with spanner type screws.
Pulls shall be in accordance with BHMA
A156.6 J403.
2.8.3
Door Stops and Holders
2.8.3.1
Type PH1
In accordance with BHMA A156.8 -C01511; overhead concealed slide type.
Exposed screws shall be spanner head.
2.8.3.2
Type PH2
In accordance with BHMA A156.8 -C02511; overhead surface mounted slide
type; attached with hex nut and bolt assemblies. Exposed screws shall be
spanner head.
2.8.3.3
Type OH3
In accordance with BHMA A156.8 -C08511, overhead surface mounted rod type,
attached with hex nut and bolt assemblies. Exposed screws shall be spanner
head.
2.8.3.4
Type FS1
In accordance with BHMA A156.16 -L02131.
Bronze.
2.8.3.5
Type FS2
In accordance with BHMA A156.16 -L01371.
Bronze.
2.8.3.6
Type FS3
In accordance with BHMA A156.16 -L02141-L02161.
Bronze. Exposed screw
shall be spanner head.
2.9
DEADBOLTS (HEAD AND FOOT BOLT)
Surface mounted and 25 mm one inch diameter with 20 mm 3/4 inch throw.
Bolt shall be operated by spanner key case, be malleable iron, or steel
with cover. Attachment shall be with spanner head screws.
2.10
DOOR POSITION SWITCHES
2.10.1
Type 1 Door Position Switch
Mechanically mortised door position switch with the following features:
a.
Components concealed when door is in closed position.
b.
Switch mechanism housing mortises into door frame headers.
c.
Galvanized steel actuator arm.
d.
Actuator arm track mortises into the top rail of the door.
e.
Allows door opening 180 degrees.
f.
Switch monitors door position within 20 mm 3/4 inch from the
leading edge of the door to the door stop.
SECTION 11194
Page 12
Previous Page
