d.
Deadlatch 20 mm 3/4 inch throw stainless steel with saw resistant
insets.
e.
Stainless steel deadlocking bolt, base plate, and strike.
f.
Signal switch for lock status.
g.
Plug connectors for conductors.
2.5.4
Type 4 Lock
Mortise lock for security hollow metal swinging doors with the following
features:
a.
Mogul cylinder key operated one or two sides.
b.
Cast brass, bronze, or stainless steel bolts. 25 mm One inch
throw with saw resistant inserts. Knob operated deadbolt.
c.
Armored front adjustable 3 in 50 mm 1/8 in 2 inches.
d.
Strike and mounting screws.
e.
Snap locks automatically when door is closed.
2.5.5
Type 5 Lock
Mechanical deadlocking latch lock for security hollow metal swinging doors
with the following features:
a.
Mogul key operated one or two sides.
b.
Five lever tumbler with spring temper brass/bronze springs.
c.
Steel or stainless steel latchbolt.
d.
Lock case primed for paint or galvanized.
e.
Lock mounting plate including escutcheon mounting screws and
strike.
2.5.6
Type 6 Lock
Mechanical deadlock for use on security hollow metal doors with the
following features.
a.
Mogul key operated one or two sides.
b.
Five lever tumblers with spring tempered brass/bronze screws.
c.
Malleable iron case and cover.
d.
Bronze deadbolt 20 by 38 by 16 mm 3/4 by 1 1/2 by 5/8 inchthrow.
e.
Lock case and cover primed for paint.
f.
Lock mounting plate including escutcheon, mounting screws and
strike.
SECTION 11194
Page 10
Previous Page
