2.2.6
Mirror, Tilt (MT)
**************************************************************************
NOTE: Mounting height of mirror shall be shown on
the drawings.
**************************************************************************
Tilt mirror shall be surface mounted and shall provide full visibility for
persons in a wheelchair. Mirror shall have [adjustable] [fixed] tilt,
extending at least 100 mm 4 inches from the wall at the top and tapering to
25 mm 1 inch at the bottom. Size shall be in accordance with [paragraph
SCHEDULE] [the drawings] [_____]. Glass for mirrors shall conform to ASTM
C 1036 and paragraph Glass Mirrors.
TOWEL=DISPENSER>
NSER/WASTE>
TOWEL=DISPENSER>
NSER/WASTE>
TOWEL=DISPENSER>
NSER/WASTE>
TOWEL=DISPENSER>
NSER/WASTE> 2.2.7
Paper Towel Dispenser (PTD)
**************************************************************************
NOTE: A tumbler key lock is the standard locking
mechanism for manufacturers and push button or
twist-type locks are normally a specialty,
extra-cost item, if available.
**************************************************************************
Paper towel dispenser shall be [_____] and shall be constructed of not less
than [22 gauge carbon steel] [0.683 mm 0.269 inch Type 304 stainless
steel], and shall be [surface] [recessed] mounted. Dispenser shall have a
towel compartment and a [mirror door] [and] [liquid soap dispenser].
Locking mechanism shall be [tumbler key lock] [concealed tumbler key lock].
TOWEL=DISPENSER/WASTE>
TOWEL=DISPENSER/WASTE>
TOWEL=DISPENSER/WASTE>
TOWEL=DISPENSER/WASTE> 2.2.8
Combination Paper Towel Dispenser/Waste
Receptacle Units (PTDWR)
Dispenser/receptacle shall be [recessed] [semi-recessed] and shall have a
capacity of [400] [600] [_____] sheets of C-fold, single-fold, or
quarter-fold towel. Waste receptacle shall be designed to be locked in
unit and removable for service. Locking mechanism shall be tumbler key
lock. Waste receptacle shall have a capacity of [45] [68] [_____] L. [12]
[18] [_____] gallons. Unit shall be fabricated of not less than 0.8 mm
0.30 inch stainless steel welded construction with all exposed surfaces
having a satin finish. Waste receptacle that accepts reusable liner
standard for unit manufacturer shall be provided.
2.2.9
Sanitary Napkin Disposer (SND)
Sanitary napkin disposal shall be constructed of Type 304 stainless steel
with removable leak-proof receptacle for disposable liners. [Fifty]
[_____] disposable liners of the type standard with the manufacturer shall
be provided. Receptacle shall be retained in cabinet by tumbler lock.
Disposer shall be provided with a door for inserting disposed napkins, and
shall be [recessed] [partition mounted, double access] [surface mounted].
SECTION 10800
Page 10
Previous Page
