encouraged and is considered justified for large
projects. For smaller projects, the NACE inspector
can interface with the manufacturer for required
information and guidance.
**************************************************************************
Evidence of experience and training of the Coating Manufacturer's
Representative(s) shall include literature documenting name, phone number
and address, a statement from the coating manufacturer certifying that the
representative has successfully completed all of the manufacturer's
training for material storage, mixing, application, and testing, and has
been directly involved in evaluation and application of industrial coatings
on a minimum of 10 steel structures within the last 5 years, and is not an
employee of the Contractor. The manufacturer's representative shall advise
on surface preparation, inspections, surface repair materials and methods,
material handling, batching and mixing, application, curing, and testing.
]1.4.3.7
Roof Joint Sealant Materials
Provide manufacturer's certification of conformance to contract
requirements[, and is certified in accordance with NSF 61].
1.4.3.8
Roof Joint Sealant Compatibility
Provide manufacturer's certification that the selected joint sealant is
compatible with the epoxy primer and is suitable for application directly
to prepared steel surfaces.
1.4.3.9
Epoxy Coating Materials
Provide manufacturer's certification that the epoxy lining materials are
[currently approved by the Naval Sea Systems Command and listed on the
Qualified Products Lists (QPL) for the specified materials][certified in
accordance with NSF 61 for tanks of the size being coated].
1.4.3.10
Non-metallic Abrasive
Provide manufacturer's certification that the materials are currently
approved by the Naval Sea Systems Command and listed on the Qualified
Products Lists (QPL) for the specified materials.
1.4.3.11
Metallic Abrasive
Provide manufacturer's certification of conformance to contract
requirements and provide copies of test results.
1.4.4
Product Data
1.4.4.1
Roof Joint Sealant Instructions
Submit manufacturer's printed instructions including detailed mixing and
application procedures, minimum and maximum application temperatures, and
curing procedures. Include Materials Safety Data Sheets (MSDS) for
materials to be used at the job site in accordance with 29 CFR 1926.59.
1.4.4.2
Coating System Instructions
Submit manufacturer's printed instructions including detailed mixing and
application procedures, number and types of coats required, minimum and
SECTION 09972
Page 13
Previous Page
