Submit name, address, telephone number, FAX number, and e-mail address of
the independent third party laboratory selected to perform testing of
coating samples for compliance with specification requirements. Submit
documentation that laboratory is regularly engaged in testing of paint
samples for conformance with specifications, and that employees performing
testing are qualified. If the Contractor chooses MPI to perform the Batch
Quality Conformance testing, the above submittal information is not
required, only a letter is required from the Contractor stating that MPI
will perform the testing.
1.4.2
Textured Wall Coating System
Three complete samples of each indicated type, pattern, and color of
textured wall coating system applied to a panel of the same material as
that on which the coating system will be applied in the work. Samples of
wall coating systems shall be minimum 125 x 175 mm (5 x 7 inches) and of
sufficient size to show pattern repeat and texture.
1.4.3
Sample Textured Wall Coating System Mock-Up
After coating samples are approved, and prior to starting installation, a
minimum 2430 mm x 2430 mm (8 foot x 8 foot) mock-up shall be provided for
each substrate and for each color and type of textured wall coating, using
the actual substrate materials. Once approved the mock-up samples shall be
used as a standard of workmanship for installation within the facility. At
least 48 hours prior to mock-up installation, the Contractor shall submit
written notification to the Contracting Officer's Representative.
1.5
REGULATORY REQUIREMENTS
1.5.1
In addition to requirements specified elsewhere for environmental
protection, provide coating materials that conform to the restrictions of
the local Air Pollution Control District and regional jurisdiction.
Notify Contracting Officer of any paint specified herein which fails to
conform.
1.5.2
Lead Content
Do not use coatings having a lead content over 0.06 percent by weight of
nonvolatile content.
1.5.3
Chromate Content
Do not use coatings containing zinc-chromate or strontium-chromate.
1.5.4
Asbestos Content
Materials shall not contain asbestos.
1.5.5
Mercury Content
Materials shall not contain mercury or mercury compounds.
SECTION 09900
Page 16
Previous Page
