considered as being for information only for Army
projects and for Contractor Quality Control approval
for Navy projects.
**************************************************************************
Government approval is required for submittals with a "G" designation;
submittals not having a "G" designation are [for Contractor Quality Control
approval.][for information only. When used, a designation following the
"G" designation identifies the office that will review the submittal for
the Government.] The following shall be submitted in accordance with
Section 01330 SUBMITTAL PROCEDURES:
The current MPI, "Approved Product List" which lists paint by brand, label,
product name and product code as of the date of contract award, will be
used to determine compliance with the submittal requirements of this
specification. The Contractor may choose to use a subsequent MPI "Approved
Product List", however, only one list may be used for the entire contract
and each coating system is to be from a single manufacturer. All coats on
a particular substrate must be from a single manufacturer. No variation
from the MPI Approved Products List is acceptable.
Samples of specified materials may be taken and tested for compliance with
specification requirements.
In keeping with the intent of Executive Order 13101, "Greening the
Government through Waste Prevention, Recycling, and Federal Acquisition",
products certified by SCS as meeting SCS SP01-01 shall be given
preferential consideration over registered products. Products that are
registered shall be given preferential consideration over products not
carrying any EPP designation.
SD-02 Shop Drawings
Piping identification
Submit color stencil codes
SD-03 Product Data
Coating; G, [_____], [___]
Manufacturer's Technical Data Sheets
[Sealant]
SD-04 Samples
Color; G, [_____], [___]
Submit manufacturer's samples of paint colors.
Cross reference
color samples to color scheme as indicated.
**************************************************************************
Note: The Sample Wall Coating Mock-Up is to be used
for texture wall coating systems.
**************************************************************************
[
Textured Wall Coating System; G, [_____], [___]
SECTION 09900
Page 12
Previous Page
