Sample Textured Wall Coating System Mock-Up;
G, [_____], [___]
]
SD-07 Certificates
Applicator's qualifications
Qualification Testing laboratory for coatings
G, [_____], [___]
SD-08 Manufacturer's Instructions
Application instructions
Mixing
Detailed mixing instructions, minimum and maximum application
temperature and humidity, potlife, and curing and drying times
between coats.
Manufacturer's Material Safety Data Sheets
Submit manufacturer's Material Safety Data Sheets for coatings,
solvents, and other potentially hazardous materials, as defined in
FED-STD-313.
SD-10 Operation and Maintenance Data
Coatings:
G, [_____], [__]
Preprinted cleaning and maintenance instructions for all coating
systems shall be provided.
1.3
APPLICATOR'S QUALIFICATIONS
**************************************************************************
NOTE: When using the contractor qualification
clause rather than the SSPC Certification
requirements, edit to require appropriate experience.
**************************************************************************
**************************************************************************
NOTE: Select only one of the following two bracketed
paragraphs.
**************************************************************************
[1.3.1
Contractor Qualification
Submit the name, address, telephone number, FAX number, and e-mail address
of the contractor that will be performing all surface preparation and
coating application. Submit evidence that key personnel have successfully
performed surface preparation and application of coatings on [___________]
on a minimum of three similar projects within the past three years. List
information by individual and include the following:
a.
Name of individual and proposed position for this work.
b.
Information about each previous assignment including:
Position or responsibility
SECTION 09900
Page 13
Previous Page
