details, materials, and types and thickness of glass.
**************************************************************************
NOTE: Regarding the use of SD-03 Product Data and
SD-07 Certificates, only use one of these on
complicated and large products. It is preferred to
use SD-03 Product Data. If control tower glazing
data is only available by certificates, use SD-07
Certificates.
**************************************************************************
[
SD-03 Product Data
Insulating Glass
Plastic Glazing
Glazing Accessories
Manufacturer's descriptive product data, handling and storage
recommendations, installation instructions, and cleaning
instructions.]
SD-04 Samples
Insulating Glass
Plastic Sheet
Glazing Compound
Glazing Tape
Sealant
Two 203 x 254 mm 8 x 10 inch samples of each of the following:
tinted glass, patterned glass, heat-absorbing glass, [_____] and
insulating glass units.
Three samples of each indicated material. Samples of plastic
sheets shall be minimum 125 by 175 mm 5 by 7 inches.
[
SD-07 Certificates
Insulating Glass
Plastic Glazing
Certificates stating that the glass meets the specified
requirements. Labels or manufacturers marking affixed to the
glass will be accepted in lieu of certificates.
Control Tower Insulating Glass
Glazing Accessories
Certificates from the manufacturer attesting that the units meet
the luminous and solar radiant transmission requirements for heat
absorbing glass.]
SECTION 08800
Page 7
Previous Page
