same thickness.
3. Frame and rabbet details, indicating method of
glazing.
**************************************************************************
PART 1
GENERAL
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
ANSI Z97.1
(1984; R 1994) Safety Glazing Materials
Used in Buildings
AMERICAN SOCIETY OF CIVIL ENGINEERS (ASCE)
ASCE 7
(2002) Minimum Design Loads for Buildings
and Other Structures
ASTM INTERNATIONAL (ASTM)
ASTM C 1036
(2001) Flat Glass
ASTM C 1048
(2004) Heat-Treated Flat Glass - Kind HS,
Kind FT Coated and Uncoated Glass
ASTM C 1172
(2003) Laminated Architectural Flat Glass
ASTM C 1184
(2000ae1) Structural Silicone Sealants
ASTM C 509
(2000) Elastomeric Cellular Preformed
Gasket and Sealing Material
ASTM C 669
(2000) Glazing Compounds for Back Bedding
and Face Glazing of Metal Sash
ASTM C 864
(1999) Dense Elastomeric Compression Seal
Gaskets, Setting Blocks, and Spacers
ASTM C 920
(2002) Elastomeric Joint Sealants
ASTM D 395
(2003) Rubber Property - Compression Set
ASTM D 4802
(2002) Poly(Methyl Methacrylate) Acrylic
Plastic Sheet
SECTION 08800
Page 4
Previous Page
