**************************************************************************
Warranty insulating glass units against development of material obstruction
to vision (such as dust, fogging, or film formation on the inner glass
surfaces) caused by failure of the hermetic seal, other than through glass
breakage, for a 5-year period following acceptance of the work. Provide
new units for any units failing to comply with terms of this warranty
within 45 working days after receipt of notice from the Government. [For
control tower units, the warranty period shall be [5] [10] years; warranty
shall be signed by the manufacturer.]
1.6.2
Warranty for Polycarbonate Sheet
For a 5-year period following acceptance of the work:
a.
Warranty Type I, Class A (UV stabilized) sheets against breakage;
b.
Warranty Type III (coated, mar-resistant) sheets against breakage
and against coating delamination;
c.
Warranty Type IV (coated sheet) against breakage and against
yellowing;
d.
Warranty extruded polycarbonate profile sheet against breakage.
For a 10-year period following acceptance of the work, warranty Type IV
against yellowing and loss of light transmission.
[1.6.3
Monolithic Reflective Glass
Manufacturer shall warrant the monolithic reflective glass to be free of
peeling or deteriorating of coating for a period of 10 years after Date of
Substantial Completion. Warranty shall be signed by manufacturer.
][1.6.4
Monolithic Opacified Spandrel
Manufacturer shall warrant the opacifier film on the spandrel to be free of
peeling for a period of five years after Date of Substantial Completion.
Warranty shall be signed by manufacturer.
]PART 2
PRODUCTS
2.1
GLASS
**************************************************************************
NOTE: Glazed openings subject to accidental human
impact shall be glazed with safety glazing material
in accordance with Consumer Products Safety
Commission (CPSC) Standard, 16 CFR Part 1201, Safety
Standard for Architectural Glazing Materials.
Consult applicable building codes for detail
requirements.
**************************************************************************
ASTM C 1036, unless specified otherwise. In doors and sidelights, provide
safety glazing material conforming to 16 CFR 1201.
SECTION 08800
Page 9
Previous Page
