SECTION 08800 GLAZING

**************************************************************************

USACE / NAVFAC / AFCESA

UFGS-08800 (October 2003)

------------------------------

Preparing Activity: NAVFAC

Superseding

UFGS-08800 (September 1999)

UFGS-08810A (May 1997)

UFGS-08840A (July 1995)

UNIFIED FACILITIES GUIDE SPECIFICATIONS

References are in agreement with UMRL dated 23 June 2005

**************************************************************************

SECTION 08800

GLAZING

10/03

**************************************************************************

NOTE: This guide specification covers the

requirements for normal glazing.

Comments and suggestions on this guide specification

are welcome and should be directed to the technical

proponent of the specification. A listing of

technical proponents, including their organization

designation and telephone number, is on the Internet.

Recommended changes to a UFGS should be submitted as

a Criteria Change Request (CCR).

Use of electronic communication is encouraged.

Brackets are used in the text to indicate designer

choices or locations where text must be supplied by

the designer.

**************************************************************************

NOTE: If special glazing such as leaded glass,

laminated transparent mirrors, or plastic glazing

for unprotected openings is required, add

appropriate paragraphs.

**************************************************************************

NOTE: TO DOWNLOAD UFGS GRAPHICS

Go to http://www.ccb.org/docs/ufgshome/graphtoc.pdf.

**************************************************************************

NOTE: On the drawings, show:

1. Locations of each type of glass, using same

terminology as in specification.

2.

Thickness of glass, unless glass of each type is

SECTION 08800

Page 3