PART 1
GENERAL
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
ALUMINUM ASSOCIATION (AA)
AA ADM1
(2000) Aluminum Design Manual
AMERICAN IRON AND STEEL INSTITUTE (AISI)
AISI SG-973
(1996) Cold-Formed Steel Design Manual
AMERICAN SOCIETY OF CIVIL ENGINEERS (ASCE)
ASCE 7
(2002) Minimum Design Loads for Buildings
and Other Structures
ASTM INTERNATIONAL (ASTM)
ASTM A 463/A 463M
(2002a) Steel Sheet, Aluminum-Coated, by
the Hot-Dip Process
ASTM A 653/A 653M
(2004a) Steel Sheet, Zinc-Coated
(Galvanized) or Zinc-Iron Alloy-Coated
(Galvannealed) by the Hot-Dip Process
ASTM A 755/A 755M
(2004a) Steel Sheet, Metallic Coated by
the Hot-Dip Process and Prepainted by the
Coil-Coating Process for Exterior Exposed
Building Products
ASTM A 792/A 792M
(2003) Steel Sheet, 55% Aluminum-Zinc
Alloy-Coated by the Hot-Dip Process
ASTM B 209
(2004) Aluminum and Aluminum-Alloy Sheet
and Plate
ASTM D 1654
(1992; R 2000) Evaluation of Painted or
Coated Specimens Subjected to Corrosive
Environments
ASTM D 2244
(2002e1) Calculation of Color Tolerances
and Color Differences from Instrumentally
Measured Color Coordinates
ASTM D 2247
(2002) Testing Water Resistance of
SECTION 07413
Page 4
Previous Page
