**************************************************************************
USACE / NAVFAC / AFCESA
UFGS-07413 (May 2004)
--------------------------
Preparing Activity:
NAVFAC
Superseding
UFGS-07413A (December 2003) and
UFGS 07410N (September 1999)
UNIFIED FACILITIES GUIDE SPECIFICATIONS
References are in agreement with UMRL dated 23 June 2005
**************************************************************************
SECTION 07413
METAL WALL PANELS
05/04
**************************************************************************
NOTE: This guide specification covers the
requirements for both factory color and mill finish
metal wall panels, including factory insulated wall
panels.
Comments and suggestions on this guide specification
are welcome and should be directed to the technical
proponent of the specification. A listing of
technical proponents, including their organization
designation and telephone number, is on the Internet.
Recommended changes to a UFGS should be submitted as
a Criteria Change Request (CCR).
Use of electronic communication is encouraged.
Brackets are used in the text to indicate designer
choices or locations where text must be supplied by
the designer.
**************************************************************************
**************************************************************************
NOTE: This section does not include light gage
siding for temporary construction, housing, or
preengineered metal buildings, or decorative wall
panels.
This section shall be coordinated with other system
components specifications such as framing,
insulation and sheet metal flashing. This section
shall also be coordinated with applicable Unified
Facilities Criteria as it relates to the specific
project.
**************************************************************************
SECTION 07413
Page 3
Previous Page
