ASTM E 1155
(1996; R 2001) Determining Floor Flatness
and Floor Levelness Numbers
ASTM E 1155M
(1996; R 2001) Determining Floor Flatness
and Floor Levelness Numbers (Metric)
NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY (NIST)
NIST HB 44
(2004) NIST Handbook 44: Specifications,
Tolerances, and other Technical
Requirements for Weighing and Measuring
Devices
NATIONAL READY MIXED CONCRETE ASSOCIATION (NRMCA)
NRMCA CPMB 100
(2000) Concrete Plant Standards
U.S. ARMY CORPS OF ENGINEERS (USACE)
COE CRD-C 100
(1975) Method of Sampling Concrete
Aggregate and Aggregate Sources, and
Selection of Material for Testing
COE CRD-C 104
(1980) Method of Calculation of the
Fineness Modulus of Aggregate
COE CRD-C 114
(1997) Test Method for Soundness of
Aggregates by Freezing and Thawing of
Concrete Specimens
COE CRD-C 130
(2001) Standard Recommended Practice for
Estimating Scratch Hardness of Coarse
Aggregate Particles
COE CRD-C 143
(1962) Specifications for Meters for
Automatic Indication of Moisture in Fine
Aggregates
COE CRD-C 318
(1979) Federal Specifications for Cloth,
Burlap, Jute (or Kenaf)
COE CRD-C 400
(1963) Requirements for Water for Use in
Mixing or Curing Concrete
COE CRD-C 521
(1981) Standard Test Method for Frequency
and Amplitude of Vibrators for Concrete
COE CRD-C 94
(1966) Specification for Surface Retarders
1.2
UNIT PRICES
**************************************************************************
NOTE: If Section 01270A MEASUREMENT AND PAYMENT is
included in the project specifications, this
paragraph title (UNIT PRICES) should be deleted from
this section and the remaining appropriately edited
subparagraphs below should be inserted into Section
01270A.
SECTION 03301A
Page 9
Previous Page
