**************************************************************************
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
ASTM INTERNATIONAL (ASTM)
ASTM C 109/C 109M
(2002) Compressive Strength of Hydraulic
Cement Mortars (Using 2-in. [50-mm] Cube
Specimens)
ASTM C 150
(2004a) Portland Cement
ASTM C 31/C 31M
(2003a) Making and Curing Concrete Test
Specimens in the Field
ASTM C 33
(2003) Concrete Aggregates
ASTM C 39/C 39M
(2004) Compressive Strength of Cylindrical
Concrete Specimens
ASTM C 618
(2003) Coal Fly Ash and Raw or Calcined
Natural Pozzolan for Use as a Mineral
Admixture in Concrete
ASTM C 937
(2002) Grout Fluidifier for
Preplaced-Aggregate Concrete
ASTM C 939
(2002) Flow of Grout for
Preplaced-Aggregate Concrete (Flow Cone
Method)
ASTM C 942
(1999) Compressive Strength of Grouts for
Preplaced-Aggregate Concrete in the
Laboratory
ASTM D 1143
(1981; R 1994e1) Piles Under Static Axial
Compressive Load
1.2
LUMP SUM BASIS FOR BIDS AND PAYMENT
**************************************************************************
NOTE: Where the basis for bidding is based on lump
sum price, use the following paragraphs. If the bid
is based on unit price, use paragraph UNIT PRICE
BASIS FOR BIDS AND PAYMENTS.
**************************************************************************
SECTION 02465
Page 4
Previous Page
