**************************************************************************
USACE / NAVFAC / AFCESA
UFGS-02465 (April 2004)
----------------------------
Preparing Activity: USACE
Superseding
UFGS-02465A (November 1997)
UFGS-02467N (September 1999)
UNIFIED FACILITIES GUIDE SPECIFICATIONS
References are in agreement with UMRL dated 23 June 2005
**************************************************************************
SECTION 02465
AUGER CAST GROUT PILES
04/04
**************************************************************************
NOTE: This guide specification covers the
requirements for auger cast grout piles.
Comments and suggestions on this guide specification
are welcome and should be directed to the technical
proponent of the specification. A listing of
technical proponents, including their organization
designation and telephone number, is on the Internet.
Recommended changes to a UFGS should be submitted as
a Criteria Change Request (CCR).
Use of electronic communication is encouraged.
Brackets are used in the text to indicate designer
choices or locations where text must be supplied by
the designer.
**************************************************************************
PART 1
GENERAL
**************************************************************************
NOTE: Auger cast grout piles are not recommended in
low strength soils such as peat or soils containing
layers or fields of boulders or cobbles.
On the drawings, show:
1.
Subsurface-soil-data logs
2.
Locations and size (diameter) of piles.
3.
Design tip elevation for each pile indicated.
4.
Reinforcing steel details.
5.
Locations of test piles if required.
6.
Locations of soil probes if required.
SECTION 02465
Page 3
Previous Page
