SUBMITTALS AND DELIVERABLES

Experience Matrix

Area

Qualifications

yr experience

h.

Occupied family housing

Person, customer relations

type, coordinator experience

i.

Concrete, Pavements and Soils

Materials Technician with

2 yrs experience for the

appropriate area

j.

Testing, Adjusting and Balancing

Specialist must be a member

(TAB) Personnel

of AABC or an experienced

technician of the firm

certified by the NEBB.

k.

Design Quality Control Manager

Registered Architect

or Professional Engineer

3.4.4

Additional Requirement

In addition to the above experience [and] [and/or] education requirements

the CQC System Manager shall have completed the course entitled

"Construction Quality Management For Contractors". This course is

periodically offered at [_____].

3.4.5

Organizational Changes

The Contractor shall maintain the CQC staff at full strength at all times.

When it is necessary to make changes to the CQC staff, the Contractor shall

revise the CQC Plan to reflect the changes and submit the changes to the

Contracting Officer for acceptance.

3.5

SUBMITTALS AND DELIVERABLES

Submittals, if needed, shall be made as specified in Section 01330

SUBMITTAL PROCEDURES. The CQC organization shall be responsible for

certifying that all submittals and deliverables are in compliance with the

contract requirements. When Section 15995A COMMISSIONING OF HVAC SYSTEMS

are included in the contract, the submittals required by those sections

shall be coordinated with Section 01330 SUBMITTAL PROCEDURES to ensure

adequate time is allowed for each type of submittal required.

3.6

CONTROL

Contractor Quality Control is the means by which the Contractor ensures

that the construction, to include that of subcontractors and suppliers,

complies with the requirements of the contract. At least three phases of

control shall be conducted by the CQC System Manager for each definable

feature of the construction work as follows:

3.6.1

Preparatory Phase

This phase shall be performed prior to beginning work on each definable

feature of work, after all required plans/documents/materials are

approved/accepted, and after copies are at the work site. This phase shall

SECTION 01451A

Page 10