1.4.5.4
Maintenance Manual
The maintenance manual shall include descriptions of maintenance for all
equipment including inspection, calibration, periodic preventative
maintenance, fault diagnosis, and repair or replacement of defective
components.
PART 2
PRODUCTS
2.1
RADIO FREQUENCY COMMUNICATION EQUIPMENT (RFCE)
**************************************************************************
NOTE: Show location of repeaters, antennas,
transceivers, etc.
**************************************************************************
2.1.1
Government Furnished
**************************************************************************
NOTE: Designer must identify Government furnished
RFCE with model numbers and operating
characteristics. The Government may furnish
tower or other suitable geographical location. Show
these equipment locations.
**************************************************************************
The Government will furnish RFCE as indicated. All GFE shall be tested by
the Contractor to ensure that the equipment is in calibration and
functioning correctly. Modifications to the Contractor's system shall be
made to be compatible with the GFE.
2.1.2
Contractor Furnished
RFCE not shown as Government furnished shall be furnished and installed by
the Contractor.
2.2
FM RADIO CONTROL SYSTEM COMPUTER EQUIPMENT
2.2.1
Computer
design, with the following minimum requirements:
b. Memory: 1024 MB, expandable to 2 GB
c. Diskette Drive: 3.5 inches (1.44 MB)
d. DVD Re-Writeable Drive: minimum speeds (2.4x/8x/12x/10x/32x); 2.4x
DVD re-write), 8x DVD (read), 12x CD-R (write), 10x CD-RW (re-write),
32x CD (read) speeds
e. Hard Drive: minimum 120 GB
g. Video Graphics Card, video memory: minimum 64 MB SDRAM
h. Sound card with stereo speakers
i. Real -time clock
j. Front Mounted Ports: 2 USB, 1 serial port and 1 IEEE 1394 port
k. Total Drive Bays: External (2) 3.5", (3) 5.25"; Internal (2) 3.5"
m. Total External Ports: 6 USB; 2 serial; 1 parallel; 2 PC/2; 3 IEEE
SECTION 16797A
Page 10