COAXIAL CABLE PARAMETERS
TYPE RG-11
Dielectric Core:
Solid Polyethylene
Nominal Diameter of 7.24 mm
Outer Conductor:
Single braid of 33 American Wire
Gauge bare copper wire
95 percent shield coverage minimum
Maximum Diameter of 0.86 mm
Jacket:
Manufacturer's recommendation as required
for installed location (e.g., plenum,
riser, general).
Nominal diameter of 0.405 inch
Velocity of Propagation:
66 percent nominal
Eccentricity:
10 percent maximum
72 picofarads per m, maximum
17.1 decibels per 100 m, maximum
at 0.4 gigahertz
30.9 decibels per 100 m, maximum at
1 Gigahertz
[COAXIAL CABLE PARAMETERS
TYPE RG-11
Inner Conductor:
14 American Wire Gauge
Solid bare copper
Nominal DC resistance at 20 degrees C
(68 degrees F) of 0.0082 ohms per m
(0.0025 ohms per foot)
Insulation Material:
Foamed FEP or cellular polyethylene
Nominal diameter of 7.11 mm (0.28 in)
Shield Type and Coverage:
Foil, 100% coverage
Copper braid, 60% coverage
Jacket:
Manufacturer's recommendation as required
for installed location (e.g., plenum,
riser, general)
Nominal diameter of 10.03 mm (0.395 in)
Velocity of Propagation:
83%
nominal
Eccentricity:
10% maximum
53.5 picofarads per m (16.3 picofarads
per ft), nominal
0.49 decibels per
100 m (0.15 decibels
per 100 ft) at
1 megahertz, nominal
18.1 decibels per
100 m (5.5 decibels
per 100 ft) at
1000 megahertz,
nominal
SECTION 16794A
Page 17
Previous Page
