All calls from throughout the entire system shall be routed by selectable
duty assignment programming to radio pagers as described herein. All code
blue calls shall be routed to pagers carried by the code response team.
**************************************************************************
NOTE: If a NCAV System is in the project, include
the following paragraph "g.".
**************************************************************************
g.
Call Routing - Call Logging Workstation
All calls from throughout the entire system shall be routed to the NCAV
System Call Logging Workstation.
[h.
Call Routing - Special
Identify any special call routing requirements].
1.4.3.6
System Call Processing Rates
a. The total elapsed time between the initiation of a call from a call
station to the display of that call on an annunciator shall not exceed four
(4) seconds.
b. The total elapsed time between the initiation of a call from a station
to the input of that call to the Radio Paging System for radio paging shall
not exceed four (4) seconds.
1.4.3.7
Radio Paging
**************************************************************************
NOTE: If a Radio Paging System is in the project,
and the radio page feature is required, the system
designer should coordinate interface requirements
with the Radio Paging System to be used with the
NCTV System to assure that the Radio Paging System
has the capability to provide the paging functions
specified below.
**************************************************************************
a. The system shall be interfaced with the Radio Paging System so that
calls are automatically transmitted to alphanumeric text pagers carried by
the on-duty staff.
b. The Radio Paging System shall be able to transmit, and the pagers shall
be able to receive, all call information as described below.
(1) Pager alert tones shall be identical for emergency and code
calls. If the pager vibrator alert mode is used, there shall be no alert
distinction between different priority calls.
(2) An alphanumeric text display message indicating the date and time
of the message, identification of the room or cubicle where the call
originated, and the type of call. The display message shall provide for at
least 32 alphanumeric text characters. The user room name and number shall
identify the call origination room.
(3) The room identification and call type message shall be full
English words and not any abbreviation or code. The user room name and
SECTION 16730A
Page 21
Previous Page
