equipment used in each test. The final acceptance test report
shall include a statement that all specified requirements and
conditions have been satisfied.
SD-07 Certificates
Certificates of Compliance[; G][; G, [_____]]
Proof that the items conform to the specified codes or
standards, including the requirements of CFR, NFPA, and UL.
SD-08 Manufacturer's Instructions
Installation[; G][; G, [_____]]
Preprinted material from the Manufacturer describing
installation requirements and safety precautions. Manufacturer's
requirements for the use of specific products.
SD-10 Operation and Maintenance Data
Operating and Maintenance Manuals[; G][; G, [_____]]
Submit O&M data in accordance with Section 01781 OPERATION AND
MAINTENANCE DATA, Data Package 5. Reproduced copies of O&M
Manuals will not be acceptable if a printed manual is available
from the Manufacturer. O&M Manuals available from the
Manufacturer on a CD shall be submitted in addition to the hard
copy manuals. Submit addenda to the O&M Manuals from the
Manufacturer that describe any part of the system application
design that is either not covered by, or deviates from, the O&M
Manuals from the Manufacturer.
Software Manuals[; G][; G, [_____]]
Software manual describing the functions of all software and
including all other information necessary to enable proper
loading, setup, testing, and operation. The software manual shall
include:
a.
Definition of terms and functions.
b.
Use of system and applications software.
c.
Procedures for system initialization, start-up and shutdown.
d.
Alarm reports.
e.
Reports generation.
f.
Database format and requirements for data entry.
g.
Directory of all disk files.
h. Description of all communications protocols, including data
formats, command characters, and a sample of each type of data
transfer.
Backup Software[; G][; G, [_____]]
SECTION 16730A
Page 11
Previous Page
