area to be served by the system. Each zone light
indicated on the drawings must include an individual
identification number (ID) that is used in the Zone
Light Activation Matrices that must be developed and
included in this specification. Reference the Call
Routing - Zone Lights paragraph, and the Schedule
Zone light Activation Matrices paragraphs for
further requirement information.
Throughout this specification requirements are
indicated for a Radio Page interface capability and
performance features. These capabilities and
features are valid only if there is a Radio Paging
System that is part of the project, or is provided
by the medical facility. The system designer should
verify that the Radio Paging System is available and
coordinate the requirements and interface. If this
system is not part of the project, or is not
available from the medical facility, then the
required Radio Page capability and performance need
to be deleted throughout the specification.
**************************************************************************
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
ELECTRONIC INDUSTRIES ALLIANCE (EIA)
EIA ANSI/TIA/EIA-569-A
(2001) Commercial Building Standard for
Telecommunications Pathways and Spaces**
NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)
NFPA 70
(2005) National Electrical Code
NFPA 99
(2005) Health Care Facilities
U.S. NATIONAL ARCHIVES AND RECORDS ADMINISTRATION (NARA)
47 CFR 15
UNDERWRITERS LABORATORIES (UL)
UL 1069
(2001; Rev thru Mar 2004) Hospital
Signaling and Nurse Call Equipment
UL 1778
(2003) Uninterruptible Power Systems
SECTION 16730A
Page 6