specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
ANSI C39.1
(1981; R 1992) Requirements for Electrical
Analog Indicating Instruments
ASTM INTERNATIONAL (ASTM)
ASTM A 123/A 123M
(2002) Zinc (Hot-Dip Galvanized) Coatings
on Iron and Steel Products
ASTM A 153/A 153M
(2004) Zinc Coating (Hot-Dip) on Iron and
Steel Hardware
ASTM A 167
(2004) Stainless and Heat-Resisting
Chromium-Nickel Steel Plate, Sheet, and
Strip
ASTM A 653/A 653M
(2004a) Steel Sheet, Zinc-Coated
(Galvanized) or Zinc-Iron Alloy-Coated
(Galvannealed) by the Hot-Dip Process
ASTM A 780
(2001) Repair of Damaged and Uncoated
Areas of Hot-Dipped Galvanized Coatings
ASTM D 117
(2002) Sampling, Test Methods,
Specifications for Electrical Insulating
Oils of Petroleum Origin
ASTM D 1535
(2001) Specifying Color by the Munsell
System
ASTM D 2472
(2000) Sulfur Hexafluoride
ASTM D 3455
(2002) Compatibility of Construction
Material with Electrical Insulating Oil of
Petroleum Origin
ASTM D 3487
(2000) Mineral Insulating Oil Used in
Electrical Apparatus
ASTM D 877
(2002e1) Dielectric Breakdown Voltage of
Insulating Liquids Using Disk Electrodes
ASTM D 92
(2002b) Flash and Fire Points by Cleveland
Open Cup Tester
FM GLOBAL (FM)
FM P7825
(2003) Approval Guide
SECTION 16361N
Page 6
Previous Page
