f.
Seismic Zone:
Zone [_____] as defined by ICBO UBC.
1.8
MAINTENANCE
1.8.1
Extra Materials
1.8.1.1
Paint
Furnish 4 liters one gallon of identical paint used on engine-generator set
in manufacturer's sealed container with each engine-generator set.
1.8.1.2
Filters
Furnish four spare replacement elements in their original containers for
each filter with each unit.
1.8.2
Posted Operating Instructions
Provide proposed operating instructions for the engine-generator set and
auxiliary equipment laminated between matte-surface thermoplastic sheets
and suitable for placement adjacent to corresponding equipment. After
approval, install operating instructions where directed.
PART 2
PRODUCTS
2.1
DIESEL ENGINE-GENERATOR SET
Provide diesel engine-generator sets consisting of a water cooled diesel
engine direct connected to an ac generator with a brushless excitation
system and accessories. Equipment and materials shall be the
manufacturer's standard products offered in catalogs for commercial or
industrial use.
2.1.1
Engine-Generator Set Ratings and Performance
ISO 8528. Each engine-generator set shall have a power rating of not less
than [_____] kW at 0.8 power factor and supply[ 208Y/120][ 480Y/277][
_____] -volt, three-phase,[ 60][ 50]-Hz ac output. Coordinate the
engine-generator set to ensure an installed rating in the environment
described in paragraph entitled "Site Conditions." The power of the
engine-generator set is defined as the power output available at the
generator terminals excluding the electrical power absorbed by the
essential independent auxiliaries. Essential independent auxiliaries are
items of equipment which are essential for the continued or repeated
operation of the engine which uses power supplied from a source other than
the engine.
2.1.1.1
Diesel Engine Capacity
**************************************************************************
NOTE: Select the appropriate engine-generator set
from three manufacturers that suit the intended
application based on power rating (kW) and kind of
power (i.e., number of operating hours per year and
average power output). Using the specified kW and
the total engine piston displacement per the
selected engine-generator sets catalog data,
calculate the BMEP to be specified in accordance
SECTION 16237N
Page 16
Previous Page
