Record of Document Submittal to Testing Agency

1.4.2.2

Submit not later than [30] [_____] calendar days prior to the work plan

submittal due date, a record of transmittal of the following documents to

the approved independent testing agency. Information is required to

develop a testing work plan and prepare for field testing.

a.

Copy of working as-built project drawings and specifications,

including marked design changes. Changes current as of the date

of transmission.

b.

Copies of all project submittals relating to the industrial

ventilation system. Transmit copies of final record submittals

including approval sheets.

1.4.2.3

Work Plan

Submit not later than [120] [_____] calendar days after contract award, but

before start of work, steps to be taken by the lead engineer to accomplish

the required testing. Submit the following:

a.

Memorandum of test procedure.

(1)

Proposed dates for the preliminary review and test.

(2) Plan view showing proposed test locations (i.e. static

pressure locations).

(3)

Proposed pitot traverse reading locations.

b.

Test equipment to be used.

c.

Scaffolding and other Contractor's support equipment required to

perform test.

d.

Factory representatives and other Contractor's support personnel

who will be on site for testing.

1.4.2.4

List of Test Instruments

Submit a signed and dated list of test instruments, their application,

manufacturer, model, serial number, range of operation, accuracy and date

of calibration.

1.4.3

Test Requirements

**************************************************************************

NOTE: This guide specification is not intended to

give guidance on testing air pollution control

devices. Refer to guide specifications specific to

the air pollution device.

**************************************************************************

NOTE: This guide specification does not address

testing the heating and cooling equipment in the

industrial ventilation system. Refer to Section

15950, "HVAC Testing/Adjusting/Balancing," to test

heating and cooling equipment. Coordinate the

SECTION 15951N

Page 9