MAINTENANCE DATA.
SD-11 Closeout Submittals
Qualified service organization list; G
1.9
QUALITY ASSURANCE
1.9.1
Standard Products
a.
Material and equipment shall be standard products of manufacturers
regularly engaged in the manufacturing of such products, using
similar materials, design and workmanship. The standard products
shall have been in satisfactory commercial or industrial use for 2
years prior to bid opening. The 2-year use shall include
applications of similarly sized equipment and materials used under
similar circumstances.
The 2 years experience must be satisfactorily completed by a
product which has been sold or is offered for sale on the
commercial market through advertisements, manufacturers' catalogs,
or brochures. Products having less than a 2-year field service
record will be acceptable if a certified record of satisfactory
field operation, for not less than 6000 hours exclusive of the
manufacturer's factory tests, can be shown.
b.
The equipment items shall be supported by a service organization.
1.9.2
Nameplates and Tags
a.
Provide nameplates bearing legends as shown and tags bearing
device unique identifiers as shown shall have engraved or stamped
characters. Nameplates shall be mechanically attached to HVAC
control panel doors.
b.
A plastic or metal tag shall be mechanically attached directly to
each field-mounted device or attached by a metal chain or wire.
c.
Each airflow measurement station shall have a tag showing flow
rate range for signal output range, duct size, and device
identifier where shown.
1.9.3
Verification of Dimensions
Contractor shall become familiar with details of work, shall verify
dimensions in the field, and shall advise Contracting Officer of any
discrepancy before performing work.
1.9.4
Modification of References
Accomplish work in accordance with ASME B31.1, ASME B31.5, NFPA 70, and
NFPA 90A, except as modified herein or indicated otherwise for equipment,
materials, installation, examination, inspection, and testing. Consider
the advisory or recommended provisions to be mandatory, as though the word
"shall" had be substituted for the words "should" or "could" or "may,"
wherever they appear. Interpret reference to "authority having
jurisdiction" and "owner" to mean the Contracting Officer.
SECTION 15901N
Page 14
Previous Page
