f.
High and low refrigerant temperature switch set-points
g.
Low oil pressure switch set-point.
h.
Defrost system timer and thermostat set-points.
i.
Moisture content.
j.
Capacity control set-points.
k. Field data and adjustments which affect unit performance and
energy consumption.
l. Field adjustments and settings which were not permanently
marked as an integral part of a device.
SD-07 Certificates
Materials and Equipment
Where the system, components, or equipment are specified to
comply with requirements of ARI, ASHRAE, ASME, or UL, proof of
such compliance shall be provided. The label or listing of the
specified agency shall be acceptable evidence. In lieu of the
label or listing, a written certificate from an approved,
nationally recognized testing organization equipped to perform
such services, stating that the items have been tested and conform
to the requirements and testing methods of the specified agency
may be submitted. When performance requirements of this project's
drawings and specifications vary from standard ARI rating
conditions, computer printouts, catalog, or other application data
certified by ARI or a nationally recognized laboratory as
described above shall be included. If ARI does not have a current
certification program that encompasses such application data, the
manufacturer may self certify that his application data complies
with project performance requirements in accordance with the
specified test standards.
Service Organization
A certified list of qualified permanent service organizations,
which includes their addresses and qualifications, for support of
the equipment. The service organizations shall be reasonably
convenient to the equipment installation and be able to render
satisfactory service to the equipment on a regular and emergency
basis during the warranty period of the contract.
SD-10 Operation and Maintenance Data
Operation and Maintenance Manuals
[Six] [_____] complete copies of an operation manual in bound
216 x 279 (8-1/2 x 11 inch) 8-1/2 x 11 inch booklets listing
step-by-step procedures required for system startup, operation,
abnormal shutdown, emergency shutdown, and normal shutdown at
least [4] [_____] weeks prior to the first training course. The
booklets shall include the manufacturer's name, model number, and
parts list. The manuals shall include the manufacturer's name,
model number, service manual, and a brief description of all
SECTION 15700A
Page 10
Previous Page
