complete copies of maintenance manual in bound 216 x 279 (81/2 x
11 inch) 8 1/2 x 11 inch booklets listing routine maintenance
procedures, possible breakdowns and repairs, and a trouble
shooting guide. The manuals shall include piping and equipment
layouts and simplified wiring and control diagrams of the system
as installed.
1.3
SAFETY REQUIREMENTS
Exposed moving parts, parts that produce high operating temperature, parts
which may be electrically energized, and parts that may be a hazard to
operating personnel shall be insulated, fully enclosed, guarded, or fitted
with other types of safety devices. Safety devices shall be installed so
that proper operation of equipment is not impaired. Welding and cutting
safety requirements shall be in accordance with AWS Z49.1.
1.4
DELIVERY, STORAGE, AND HANDLING
Stored items shall be protected from the weather, humidity and temperature
variations, dirt and dust, or other contaminants. Proper protection and
care of all material both before and during installation shall be the
Contractor's responsibility. Any materials found to be damaged shall be
replaced at the Contractor's expense. During installation, piping and
similar openings shall be capped to keep out dirt and other foreign matter.
1.5
PROJECT REQUIREMENTS
1.5.1
Verification of Dimensions
The Contractor shall become familiar with all details of the work, verify
all dimensions in the field, and advise the Contracting Officer of any
discrepancy before performing any work.
1.5.2
Drawings
Because of the small scale of the drawings, it is not possible to indicate
all offsets, fittings, and accessories that may be required. The
Contractor shall carefully investigate the plumbing, fire protection,
electrical, structural and finish conditions that would affect the work to
be performed and shall arrange such work accordingly, furnishing required
offsets, fittings, and accessories to meet such conditions. The Contractor
shall submit detailed drawings consisting of:
a. Equipment layouts which identify assembly and installation
details.
b. Plans and elevations which identify clearances required for
maintenance and operation.
c. Wiring diagrams which identify each component individually and
all interconnected or interlocked relationships between components.
d. Foundation drawings, bolt-setting information, and foundation
bolts prior to concrete foundation construction for all equipment
indicated or required to have concrete foundations.
e. Details, if piping and equipment are to be supported other
than as indicated, which include loadings and type of frames,
brackets, stanchions, or other supports.
SECTION 15620A
Page 10
Previous Page
