Adjusting, Balancing, Testing and Inspecting
Test reports in booklet form showing all field tests performed
to adjust each component and all field tests performed to prove
compliance with the specified performance criteria, upon
completing and testing the system. Each test report shall
indicate the final position of controls.
SD-10 Operation and Maintenance Data
Operating and Maintenance Instructions
[Six] [_____] complete copies of operation manuals outlining the
step-by-step procedures required for system startup, operation,
and shutdown. The manuals shall include the manufacturer's name,
model number, service manual, parts list, and a brief description
of all equipment and their basic operating features. [Six]
[_____] complete copies of maintenance manuals listing routine
maintenance procedures, possible breakdowns and repairs, and
troubleshooting guides. The manuals shall include piping layout,
equipment layout, and simplified wiring and control diagrams of
the system as installed.
1.3
GENERAL REQUIREMENTS
1.3.1
Standard Products
Material and equipment shall be the standard products of a manufacturer
regularly engaged in the manufacture of the products and shall essentially
duplicate items that have been in satisfactory use for at least 2 years
prior to bid opening. Equipment shall be supported by a service
organization that is, in the opinion of the Contracting Officer, reasonably
convenient to the site.
1.3.2
Nameplates
Each major item of equipment shall have the manufacturer's name, address,
type or style, model or serial number, and catalog number on a plate
secured to the item of equipment.
1.3.3
Prevention of Rust
Unless otherwise specified, surfaces of ferrous metal subject to corrosion
shall be factory prime painted with a rust inhibiting coating and
subsequently factory finish painted in accordance with the manufacturer's
standard practice. Equipment exposed to high temperature when in service
shall be prime and finish painted with the manufacturer's standard heat
resistant paint to a minimum thickness of 0.025 mm 1 mil.
1.3.4
Equipment Guards and Access
**************************************************************************
NOTE: Catwalk, ladder, and guardrail will be
indicated if required for access to equipment. If
not applicable delete the entire sentence within the
brackets.
**************************************************************************
Belts, pulleys, chains, gears, couplings, projecting setscrews, keys, and
SECTION 15562A
Page 11
Previous Page
