(Engineering Division or other organization in the
District Office); "AO" for Area Office; "RO" for
Resident Office; and "PO" for Project Office. Codes
following the "G" typically are not used for Navy
projects.
Submittal items not designated with a "G" are
considered as being for information only for Army
projects and for Contractor Quality Control approval
for Navy projects.
**************************************************************************
Government approval is required for submittals with a "G" designation;
submittals not having a "G" designation are for [Contractor Quality Control
approval.] [information only. When used, a designation following the "G"
designation identifies the office that will review the submittal for the
Government.] The following shall be submitted in accordance with Section
01330 SUBMITTAL PROCEDURES:
SD-02 Shop Drawings
Drawings
Installation
Detail drawings consisting of schedules, performance charts,
brochures, diagrams, drawings, and instructions necessary for
installation of the systems as specified. Detail drawings for
pumping units and appurtenances, including controls. Drawings
shall indicate clearances required for maintenance and operation
and shall also contain complete wiring and schematic diagrams,
equipment layout and anchorage, and any other details required to
demonstrate that the system has been coordinated and will properly
function as a unit.
Pipe Anchors
Detailed drawings of pipe anchors, before installation.
SD-03 Product Data
Welding
System Equipment
A copy of qualified procedures and a list of names and
identification symbols of qualified welders and welding operators.
Spare parts data for each item of equipment provided, after
approval of the drawings and not later than [_____] months before
the date of beneficial occupancy. The data shall include a
complete list of spare parts and supplies, with current unit
prices and supplies, with current unit prices and supply sources.
Framed Instructions
Proposed diagrams, instructions, and other sheets, before
SD-06 Test Reports
SECTION 15562A
Page 10
Previous Page
