1.3.11
Detail Drawings
The Contractor shall submit detail drawings consisting of schedules,
performance charts, brochures, diagrams, drawings, and instructions
necessary for installation of the steam-generating units and associated
equipment, and for piping, wiring devices, trenches and related
foundations. Detail drawings for steam generators and appurtenances,
including the fuel system. Drawings shall indicate clearances required for
maintenance and operation and shall also contain complete wiring and
schematic diagrams, equipment layout and anchorage, and other details
required to demonstrate that the system has been coordinated and will
function properly as a unit. Manufacturers' confidential information
concerning manufacturing techniques and proprietary data such as detailed
fabrication shop drawings are not required.
1.3.12
Spare Parts
The Contractor shall submit spare parts data for each item of equipment
provided, after acceptance of the detail drawings and not later than
[_____] months before the date of beneficial occupancy. The data shall
include a complete list of spare parts and supplies, with current unit
prices and sources of supply.
1.3.13
Experience
The Contractor shall submit evidence of the Contractor's prior experience
in installing similar equipment, including a list of 5 combustion control
installations on boilers of equal or larger size that have been in
satisfactory operation for 2 years prior to bid opening; also, the location
of the combustion control installations.
1.4
DELIVERY AND STORAGE
Equipment delivered and placed in storage shall be stored with protection
from the weather, excessive humidity and excessive temperature variation;
and dirt, dust, or other contaminants.
1.5
TOOLS
Tools shall include special tools necessary for the operation and
maintenance of boilers, burners, pumps, fans, and other equipment. Small
hand tools shall be furnished with a suitable hardwood cabinet mounted
where directed. Special wrenches for opening boiler manholes, handholes,
and cleanouts shall be provided.
PART 2
PRODUCTS
2.1
MATERIALS
Materials shall comply with the following:
2.1.1
Brick, Common
ASTM C 62.
2.1.2
Bricks, Refractory
ASTM A 653/A 653M, class as recommended by the boiler manufacturer.
SECTION 15561A
Page 19
Previous Page
