Architect-Engineer; "DO" for District Office
(Engineering Division or other organization in the
District Office); "AO" for Area Office; "RO" for
Resident Office; and "PO" for Project Office. Codes
following the "G" typically are not used for Navy
projects.
Submittal items not designated with a "G" are
considered as being for information only for Army
projects and for Contractor Quality Control approval
for Navy projects.
**************************************************************************
Government approval is required for submittals with a "G" designation;
submittals not having a "G" designation are for [Contractor Quality Control
approval.] [information only. When used, a designation following the "G"
designation identifies the office that will review the submittal for the
Government.] The following shall be submitted in accordance with Section
01330 SUBMITTAL PROCEDURES:
SD-02 Shop Drawings
High Temperature Water Generators
Detail drawings consisting of schedules, performance charts,
brochures, diagrams, drawings, and instructions necessary for
installation of the HTW generating units and associated equipment,
and for piping, wiring, devices, trenches, and related
foundations. Complete setting plans certified by the HTW
generator and burner manufacturers. Detail drawings for HTW
generators and appurtenances, including coal and ash handling
equipment. Drawings shall indicate clearances required for
maintenance and operation and shall contain complete wiring and
schematic diagrams, equipment layout and anchorage, and any other
details required to demonstrate that the system has been
coordinated and will properly function as a unit. Detailed
drawings of pipe anchors, before installation. Manufacturer's
written instructions indicating optimum pressure at all manometer
connectors shall be included.
SD-03 Product Data
Calculations
Manufacturer's design data and structural computations, as
specified.
Spare Parts
Spare parts data for each item of equipment provided, as
specified.
Manufacturer's Instructions
Proposed diagrams, instructions, and other sheets, before
posting. Framed instructions under glass or in laminated plastic,
including wiring and control diagrams showing the complete layout
of the entire system, shall be posted where directed. Condensed
operating instructions explaining preventive maintenance
SECTION 15555A
Page 13
Previous Page
