PART 2
PRODUCTS
2.1
Y2K Compliant Products
**************************************************************************
NOTE: To ensure that buildings' systems continue to
function beyond Year 2000, the following paragraph
must be included when this section is part of a
construction contract. For more information on Y2K,
see these web sites on the Internet.
http://www.doncio.navy.mil/y2k/year2000.htm, the
Year 2000 homepage of the Department of the Navy
Chief Information Officer (DONCIO);
http://www.itpolicy.gsa.gov/mks/yr2000.legal.htm,
the General Services Administration (GSA) Chief
Information Officer (CIO) homepage for Y2K
procurement, contracting, and legal issues;
http://y2k.lmi.org/gsa/y2kproducts contains
information on vendor product compliance
**************************************************************************
Provide computer controlled facility components, specified in this section,
that are Year 2000 compliant (Y2K). Computer controlled facility
components refers to software driven technology and embedded microchip
technology. This includes, but is not limited to, utility monitoring and
control systems, alarms, and other facilities control systems utilizing
microcomputer, minicomputer, or programmable logic controllers.
2.2
MATERIALS AND EQUIPMENT
Materials and equipment complete with accessories shall be selected by the
Contractor for performance compatibility.
2.3
AIR COMPRESSOR
**************************************************************************
NOTE: The use of restrictive requirements for the
nonlubricated rotary screw air compressor specified
in this guide specification has been approved by
NAVFACENGCOM HQ (Code 021) in accordance with the
requirements of NAVFAC P-68. The paragraphs in this
guide specification may be used without any further
NAVFACENGCOM HQ approval or request for waiver.
**************************************************************************
The air compressors shall be packaged, positive displacement rotary screw
compressors capable of delivering oil-free air. No lubricant shall be used
within the compression chamber. Include air compressor, electric motor
driver, coolers, lubrication system, and regulation and control systems
mounted on a common base frame, and completely enclosed for noise control.
2.3.1
Manufacturer's Certifications
The manufacturer shall certify that the air compressors proposed are of the
same design, construction, size, and of equal or not more than 10 percent
smaller in capacity as compressors which have been in satisfactory
continuous service for at least 2 years at not less than two locations.
Furnish the name of the owner, the address of the installation, and the
name of a person at the installation who can be contacted for verification.
SECTION 15215N
Page 12
Previous Page
