the Government.] The following shall be submitted in accordance with
Section 01330 SUBMITTAL PROCEDURES:
SD-02 Shop Drawings
Submersible Pump[; G][; G, [_____]]
Within [90] [_____] days of Notice of Award, submit drawings
listed below. Submitted drawings shall be of sufficient size to
be easily read. Submit information in the English language.
Dimensions shall be in metric with English conversion.
a. Outline drawings of the pump showing dimensions and weight
of the pump/motor.
b. Drawings showing details and dimensions of pump mounting
design and layout including any embedded items.
c. Cross-sectional drawings of the pump, showing each
component, should show major or complicated sections of the pump
in detail. On each drawing indicate an itemized list of
components showing type, grade, class of material used, and make
and model of the standard component used. Include detail and
assembly drawings of entire pumping unit assembly.
d. Provide drawings covering the installation that the
Contractor intends to furnish to the erecting engineer.
e. The capacity-head curve should indicate efficiency, kW, bhp,
and NPSHR.
f. Motor characteristic curves or tabulated data (test or
calculated) should indicate the speed, power factor, efficiency,
current, and kilowatt input, all plotted or tabulated against
percent load as abscissas.
SD-03 Product Data
Materials
Submit a list designating materials to be used for each pump
part along with the submittal of the drawings.
If deviation from specified materials is desired, submit
complete specifications for the proposed deviating materials after
award of the contract.
Equipment[; G][; G, [_____]]
Within 60 days of Notice of Award, submit a list of equipment as
specified in paragraph Equipment.
Spare Parts
Submit [10] [_____] copies of manufacturers complete parts list
showing all parts, spare parts, and bulletins for pump. Clearly
show all details, parts, and adequately describe parts or have
proper identification marks. The parts lists shall be printed on
good quality [_____] mm by [_____] mm 8 1/2 by 11 inch paper,
SECTION 15132A
Page 9
Previous Page
