padlock complete with three keys. Pack "special tools" in wooden boxes if
size and weight do not permit storage in tool cabinet. Provide slings if
box and tools are heavier than 34 kg 75 pounds.
1.8
ERECTION ENGINEER(S)
Furnish one or more competent erecting engineers fluent in English language
who is knowledgeable about the installation of the vertical pumps and
associated drive machinery. Erecting engineers provided by this section
shall include those from Contractor's suppliers. When so requested,
erecting engineers shall provide and be responsible for providing complete
and correct direction during initial starting and subsequent operation of
equipment until field tests are completed. Erecting engineer shall
initiate instructions for actions necessary for proper receipt, inspection,
handling, uncrating, assembly, and testing of equipment. The Erecting
Engineer(s) shall also keep a record of measurements taken during erection,
and shall furnish one copy to Contracting Officer on request or on
completion of installation of assembly or part. Erecting engineer shall
instruct Contracting Officer in operation and maintenance features of work.
PART 2
PRODUCTS
2.1
MATERIALS AND METALWORK FABRICATION
**************************************************************************
NOTE: The Designer should discuss materials and
design details for specific site application with
pump manufacturers; and the Designer should edit
Sections 05055 and 05502 as appropriate.
**************************************************************************
If not specified, materials and fabrication shall conform to the
requirements of Section 05055A METALWORK FABRICATION, MACHINE WORK,
MISCELLANEOUS PROVISIONS and Section 05502A METALS: MISCELLANEOUS,
STANDARD ARTICLES, SHOP FABRICATED ITEMS. Material selection not specified
shall be guided by HI 9.1-9.5 for corrosion, erosion, and abrasion
resistance. Deviations from the specified materials shall be submitted in
accordance with paragraph SUBMITTALS.
2.1.1
Designated Materials
Designated materials shall conform to the following specifications, grades,
and classifications.
MATERIAL
GRADE
CLASS
SPECIFICATION
Aluminum-Bronze
Alloy No.
ASTM B 148
C95500
Castings
Class No.
150A, 150B,
ASTM A 48/A 48M
and 150C
30A, 30B,
ASTM A 48/A 48M
and 30C
Cast Steel
Grade
ASTM A 27/A 27M
65-35
annealed
Coat Tar Protective
AWWA C203
SECTION 15131A
Page 17
Previous Page
