submittals are already marked with a "G". Only
delete an existing "G" if the submittal item is not
complex and can be reviewed through the Contractor's
Quality Control system. Only add a "G" if the
submittal is sufficiently important or complex in
context of the project.
For submittals requiring Government approval on Army
projects, a code of up to three characters within
the submittal tags may be used following the "G"
designation to indicate the approving authority.
Codes for Army projects using the Resident
Management System (RMS) are: "AE" for
Architect-Engineer; "DO" for District Office
(Engineering Division or other organization in the
District Office); "AO" for Area Office; "RO" for
Resident Office; and "PO" for Project Office. Codes
following the "G" typically are not used for Navy
projects.
Submittal items not designated with a "G" are
considered as being for information only for Army
projects and for Contractor Quality Control approval
for Navy projects.
**************************************************************************
Government approval is required for submittals with a "G" designation;
submittals not having a "G" designation are [for Contractor Quality Control
approval.][for information only. When used, a designation following the
"G" designation identifies the office that will review the submittal for
the Government.] The following shall be submitted in accordance with
Section 01330 SUBMITTAL PROCEDURES:
[[_____] will review and] [_____] Division, Naval Facilities Engineering
Command will approve submittals requiring special review in this section.
SD-02 Shop Drawings
Track beam system; G
Submit drawings showing the general arrangement of the track
beam system, including curves and switches, clearances, principal
dimensions, details of structural connections, and all component
details. Manufacturer's catalog data will suffice for items of
standard manufacturer.
SD-05 Design Data
Structural design calculations; G
SD-06 Test Reports
Hook and hook nut magnetic-particle tests; G
Monorail system load tests; G
SD-07 Certificates
Manual hoist load chain
SECTION 14534N
Page 5
Previous Page
