"G" designation identifies the office that will review the submittal for
the Government.] The following shall be submitted in accordance with
Section 01330 SUBMITTAL PROCEDURES:
[ The [[_____] Division] [Engineering Field Activity [______]], Naval
Facilities Engineering Command, Fire Protection Engineer, will review and
approve all submittals in this section requiring Government approval.]
**************************************************************************
NOTE: For projects administered by the Pacific
Division and Engineering Field Activity Chesapeake,
Naval Facilities Engineering Command, use the
optional "SUBMITTALS" article immediately below and
delete the general "SUBMITTALS" article above for
Navy projects.
**************************************************************************
[ The [[_____] Division] [Engineering Field Activity [_____]], Naval
Facilities Engineering Command, Fire Protection Engineer delegates the
authority to the Quality Control (QC) Representative's U.S. Registered Fire
Protection Engineer for review and approval of submittals required by this
section. Submit to the [_____] Division, Naval Facilities Engineering
Command, Fire Protection Engineer one set of all approved submittals and
drawings immediately after approval but no more later than 15 working days
prior to final inspection.]
SD-02 Shop Drawings
Fire extinguishing system; G
SD-03 Product Data
Storage cylinder; G
Fusible links; G
Release mechanisms; G
Valve; G
Discharge nozzle; G
Pipe and fittings; G
Piping and accessories; G
Remote manual actuation stations; G
Pressure-operated switches; G
Manufacturer's installation and maintenance manuals; G
SD-07 Certificates
Qualifications of installer; G
SD-08 Manufacturer's Instructions
Fire extinguishing system; G
SECTION 13971N
Page 5
Previous Page
