communicator transmitters, and points of connection
to AC power (Note: AC power shall be obtained ahead
of the main disconnects).
4. A table showing each transmitter location, phone
number, and the number of auxiliary zones to be
connected and their descriptions (e.g., Bldg. 591,
phone numbers: 555-1212, 555-1213; Zone 1 - FACP
Zone 1; Zone 2 - FACP Zone 2; Zone 3 - Sprinkler
Riser, etc.).
**************************************************************************
PART 1
GENERAL
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
ANSI C80.1
(1994) Rigid Steel Conduit - Zinc Coated
ANSI C80.3
(1994) Electrical Metallic Tubing, Zinc
Coated
FM GLOBAL (FM)
FM P7825
(2003) Approval Guide
INSTITUTE OF ELECTRICAL AND ELECTRONICS ENGINEERS (IEEE)
IEEE C62.41
(1991; R 1995) Recommended Practice for
Surge Voltages in Low-Voltage AC Power
Circuits
NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)
NFPA 70
(2005) National Electrical Code
NFPA 72
(2002) National Fire Alarm Code
UNDERWRITERS LABORATORIES (UL)
UL 1242
(2000; Rev thru May 2003) Electrical
Intermediate Metal Conduit -- Steel
UL 467
(2004) Grounding and Bonding Equipment
UL 514A
(2004) Metallic Outlet Boxes
SECTION 13854N
Page 4
Previous Page
