2.7.1
Interconnection to Alarm System
Provide interconnection between CAD system[s] and radio alarm
receiving/decoding networks [,and] [existing wired box circuits] [,and
Enhanced 9-1-1 telephone system] so that alarms are automatically
displayed on the CAD monitor screen and printed on the CAD printer as they
are received.
2.7.2
Provide color monitor, [ ___ ] inch or larger with [ ___ ] by [ ___ ]
resolution. Provide ergonomically-designed soft-touch computer keyboard
with wrist support.
2.7.3
Printer
Provide color laser printer, capable of printing [6] [ ___ ] pages per
minute in text mode. Printer shall use standard 8.5"x11" (216mm x 279 mm)
[tractor-feed] [or][loose-leaf] paper.
2.7.4
Automatic Display
Upon automatic receipt of an alarm, system shall display and print
the
following:
Box number
Zone number (when applicable)
Type of alarm (fire, medical emergency, water flow, supervisory, etc.)
Building name or number
Street address
Nearest street intersection
Emergency response unit assignments by unit type and number for first,
second, third, and subsequent alarms, including substitute unit(s) for
normally-assigned unit(s) previously entered into the system by the
telecommunicator as being in a status which makes them not available to
respond.
Pre-Incident Planning Information/Special instructions for
first-arriving units.
2.7.5
Manual Alarm Entry Capability
Provide system with manual alarm entry capability. The system shall enable
the telecommunicator to enter alarm locations by any of the following:
Building number, phantom box number, street address, nearest street
intersection. When an alarm is manually entered, the system shall display
and print information specified in paragraph entitled "Automatic Display".
2.7.6
Unit Status Tracking Capability
Provide system with unit status tracking capability . The system shall
enable the telecommunicator to record changes in individual unit status
(in-station, responding, on-scene, etc.) with no more than two keystrokes
SECTION 13853N
Page 27