Installer's qualifications; G
Instructor's qualifications; G
SD-10 Operation and Maintenance Data
IDS components, Data Package 5; G
IDS software, Data Package 1; G
Submit in accordance with Section 01781 OPERATION AND
MAINTENANCE DATA and Section 16050N BASIC ELECTRICAL MATERIALS AND
METHODS.
1.6
QUALITY ASSURANCE
1.6.1
Drawings
1.6.1.1
IDS Components
Submit drawings that clearly and completely indicate the function of each
IDS component. Indicate termination points of devices, and
between modules and devices. In addition, submit a layout drawing showing
spacing of components, location, mounting and positioning details.
1.6.1.2
Overall System Schematic
Indicate the relationship of integrated components on one diagram and show
power source, system controls, impedance matches; plus number, size,
identification, and maximum lengths of interconnecting wires. Drawings
shall be not less than [420 by 297] [_____] mm [11 by 17] [_____] inches.
1.6.2
Evidence of Experience and Qualifications
1.6.2.1
Installer's Qualifications
Prior to installation, submit data of the installer's experience and
qualifications. Show that the installer who will perform the work has a
minimum of [2] [_____] years experience successfully installing IDS of the
same type and design as specified herein. Include the names, locations,
and points of contact of at least two installations of the same type and
design as specified herein where the installer has installed such systems.
Indicate the type of each system and certify that each system has performed
satisfactorily in the manner intended for a period of not less than [12]
[_____] months.
1.6.2.2
Instructor's Qualifications
Prior to installation, submit data of the instructor's experience and
qualifications. Show that the instructor, who will train operating and
maintenance personnel, has received a minimum of 24 hours of IDS training
from a technical organization such as the National Burglar and Fire Alarm
Association, and 2 years experience in the installation of IDS of the type
specified.
SECTION 13703N
Page 14