housekeeping, handling, storing, transporting and disposing of asbestos
material apply: [_____].
1.7
SAFETY AND HEALTH PROGRAM AND PLANS
The Contractor shall prepare a written comprehensive site-specific Accident
Prevention Plan (APP) at least [30] [_____] days prior to the
preconstruction conference. The APP shall be in accordance with the format
and requirements in Appendix A of EM 385-1-1. The APP shall incorporate an
Asbestos Hazard Abatement Plan (AHAP), and Activity Hazard Analyses (AHAs)
as separate appendices into one site-specific document. The APP shall take
into consideration all the individual asbestos abatement work tasks
identified in Table 1. See Section 01525 SAFETY AND OCCUPATIONAL HEALTH
REQUIREMENTS for additional requirements.
1.7.1
Asbestos Hazard Abatement Plan Appendix
The AHAP shall include, but not be limited to, the following:
a.
The personal protective equipment to be used;
b.
The location and description of regulated areas including clean
and dirty areas,access tunnels, and decontamination unit (clean
room, shower room, equipment room, storage areas such as load-out
unit);
c.
Initial exposure assessment in accordance with 29 CFR 1926.1101;
d.
Level of supervision;
e.
Method of notification of other employers at the worksite;
f.
Abatement method to include containment and control procedures;
g.
Interface of trades;
h.
Sequencing of asbestos related work;
i.
Storage and disposal procedures and plan;
j.
Type of wetting agent and asbestos encapsulant;
k.
Location of local exhaust equipment;
l.
Air monitoring methods (personal, environmental and clearance);
m.
Bulk sampling and analytical methods (if required);
n.
A detailed description of the method to be employed in order to
control the spread of ACM wastes and airborne fiber;
o.
Fire and medical emergency response procedures;
p.
The security procedures to be used for all regulated areas.
1.7.2
Activity Hazard Analyses Appendix
AHAs for each major phase of work, shall be submitted and updated during
the project. The AHAs format shall be in accordance with Figure 1-1 of EM
SECTION 13280A
Page 21
Previous Page
