**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
AMERICAN WELDING SOCIETY (AWS)
AWS D1.1/D1.1M
(2004) Structural Welding Code - Steel
AWS D9.1M/D9.1
(2000) Sheet Metal Welding Code
ASTM INTERNATIONAL (ASTM)
ASTM A 36/A 36M
(2004) Carbon Structural Steel
ASTM A 366/A 366M
(1997e1) Commercial Steel, Sheet,
Carbon,(0.15 Maximum Percent Cold-Rolled
ASTM A 568/A 568M
(2004) Steel, Sheet, Carbon, and
High-Strength, Low-Alloy, Hot-Rolled and
Cold-Rolled, General Requirements for
ASTM A 569/A 569M
(1998) Steel, Carbon (0.15 Maximum
Percent), Hot-Rolled Sheet and Strip,
Commercial
ASTM B 194
(2001e1) Copper-Beryllium Alloy Plate,
Sheet, Strip, and Rolled Bar
NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)
NFPA 101
(2003) Life Safety Code
NFPA 80
(1999) Fire Doors and Fire Windows
NFPA 80A
(2001) Protection of Buildings from
Exterior Fire Exposures
U.S. DEPARTMENT OF DEFENSE (DOD)
MIL-STD-188-125
(Rev A) High-Altitude Electromagnetic
Pulse (HEMP) Protection for Ground-Base
C41 Facilities Performing Critical,
Time-Urgent Missions, Volume I Fixed
Facilities
MIL-STD-285
for Enclosures, Electromagnetic Shielding,
for Electronic Test Purposes
1.2
DEFINITIONS
1.2.1
Regularly Engaged
As it applies to the testing company is defined to mean that the testing
company has successfully performed electromagnetic shielding attenuation
(SA) test and shielded enclosure leak detection system (SELDS) tests at
least [six] [_____] times in the last [two] [_____] years.
SECTION 13095N
Page 4